Idiomas disponibles
Idiomas disponibles
Move the magnetic key or the
comes into contact with the
When you switch on the collar, the indicator light flashes in green indicating the collar is ON
When you switch off the collar, the indicator light flashes from green to red then goes out indicating the collar is
OFF.
To increase battery life, we recommend you to deactivate the collar if you are not using it for a long period.
3.4.
Coding of the remote control with the receiver collar
Each remote control has its own individual radio operator code.
The coding of the remote control with the receiver collar enables the two units to work together.
IMPORTANT: before beginning the coding procedure, make sure no other person is using his CANICOM R or
other products from the NUM'AXES range close by. Your receiver collar could accidentally record the code of
his remote control. If that occurs, re-code the remote control with the receiver collar.
CODING PROCEDURE
WARNING: if you have several collars, you have to code them one at a time.
1.
Activate the remote control.
2.
Select the collar you want to code using the 1/2 or 1/2/3/4 buttons of the remote control.
3.
Receiver collar deactivated (indicator light off): move the remote control towards the collar so that
the
symbol located on the back of the remote control comes into contact with the
the collar for 6 seconds. The indicator light on the collar lights in fixed green then flashes in red.
4.
Move the remote control away from the receiver collar (30 cm minimum).
5.
Press the vibration button on the remote control. The collar emits vibrations, it is then synchronised
with your remote control.
If you have several receiver collars, renew the same procedure for each one.
Reprogram a receiver collar
The receiver collar can be re-coded indefinitely, either with the same remote control, or with a new remote
control from the CANICOM R range.
4.
How to use the remote control
The CANICOM R-500 and CANICOM R-800 remote controls are designed to operate with 1 or 2 collars.
The CANICOM R-1500 remote control is designed to operate with 1, 2, 3 or 4 collars.
Guide d'utilisation CANICOM R-500, R-800, R-1500 – Indice A – Février 2024 - 16/64
symbol located on the back of the remote control towards the collar so that it
symbol located on the collar, hold for 1 second.
symbol on
