Table of contents
1
Introduction ........................................................
2
Product description (Fig. 1, 3) ............................
3
Scope of delivery (Fig. 1, 3) ...............................
4
Proper use..........................................................
5
Leaf blower safety instructions...........................
6
Technical data....................................................
7
Unpacking ..........................................................
8
Assembly (Fig. 3) ...............................................
9
Operation ...........................................................
10 Working instructions...........................................
11 Cleaning and maintenance ................................
12 Storage...............................................................
13 Repair & ordering spare parts ............................
14 Disposal and recycling .......................................
15 Troubleshooting .................................................
16 Warranty conditions - Scheppach 20V IXES
series..................................................................
17 EU Declaration of Conformity.............................
18 Exploded view .................................................... 195
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Wear safety goggles.
Wear hearing protection.
If dust builds up, wear respiratory protection!
Wear sturdy footwear!
Tie long hair back in a hair net.
13
14
14
14
14
16
16
16
17
17
18
18
18
18
19
19
21
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised spe-
cialists
• Installing and replacing non-original spare parts
• Improper use
Note:
Read the whole text of the operating manual before as-
sembly and commissioning.
This operating manual should help you to familiarise your-
self with your product and to use it for its intended pur-
pose.
www.scheppach.com
Do not expose the product to rain. The prod-
uct may only be stationed, stored and oper-
ated in dry ambient conditions.
Make sure that other persons maintain a
sufficient safety distance.
Hurled objects and rotating parts can cause
severe injuries.
Only carry out maintenance, modification,
adjustment and cleaning work when the mo-
tor is switched off and the battery is re-
moved.
Danger of injury! Never have your hands
near the blades.
Risk of injury due to rotating cutting roller!
Keep hands and feet outside the openings
when the product is running.
Guaranteed sound power level of the prod-
uct.
Lithium-ion battery
The product complies with the applicable
European directives.
GB | 13