Light Replacement; How To Operate - Nostalgia Products HomeCraft HCHREF30SS Instrucciones Y Recetas

LIGHT REPLACEMENT

• Switch off the extractor hood and isolate the extractor hood by
pulling out the mains plug or switching off the fuse.
• Remove the grease filter.
• Replace the lamp (commercially) led modules, separate ballast.
• Reconnect the power by inserting the mains plug or by switching on the fuse.
MAX POWER
Filament 40 Watts
lamp
Filament 40 Watts
lamp
Halogen 28 Watts
lamp
LED 3 Watts
module
LED 1.5 Watts
modules,
separate
ballast

HOW TO OPERATE

The range hood over your stove is there to remove smoke, vapors, heat, and cooking odors.
• Turn the fan on a few minutes before you start cooking. Choose
between three speed options (LOW, MEDIUM & HIGH).
• If you need light, press the ON/OFF switch on the control
panel to turn on the dual LED lights.
• Start cooking.
• Once finished, leave it running for 15 minutes and then turn off.
11
VOLTAGE LAMP CAP ILCOS D CODE
110-127V E14
220-240V E14
220-240V E14
110-240V E14
120V
IBT-40-110/127-E14-25/58
IBT-40-220/240-E14-25/58
HSG-28-220/240-E14-37
DBL-3-H-E14-35
DSH-1.5-S-33.2/120