Idiomas disponibles
Idiomas disponibles
ENGLISH
3. Put the pulp filter on top of the juice container, guided by the shaft.
4. Place the squeezing cone on top of the shaft, you can check that if it is correctly
positioned the device will work by generating some pressure on the shaft.
Please note
Both the filter and the cone are fitted to the shaft without exerting pressure. To remove them,
simply pull them out.
Operation
1. Insert the power plug into a wall socket and lift the lever. The cable can be tucked inside
the base of the juicer.
2. Place a glass under the non-drip spout and lower the spout for juice to flow into the
glass.
3. Cut the fruit in half, place one half against the squeezing cone, and lower the lever to
press the fruit against the squeezing cone. In this way, the automatic rotary movement of
the cone will extract the juice.
4. Repeat this procedure as many times as desired.
Warning
Use the juicer for 15 seconds and let it stand for another 15 seconds before using it again.
After 10 cycles of use, let the appliance stand for 30 minutes before using it again.
4. CLEANING AND MAINTENANCE
Unplug the appliance and remove the pulp filter and the squeezing cone.
-
Clean the appliance main body with a wet cloth and some drops of detergent. Do not use
-
solvents, product with an acidic pH or abrasive substances to clean the juicer.
Do not immerse the main body of the juicer in water or any other liquid.
-
Wash all detachable, non-electrical parts with water and soap.
-
The following parts are dishwasher safe:
-
Protective cover
o
o
Squeezing cone
Pulp filter
o
o
Juice container
Dry all the pieces before assembling the device back.
-
36
XQUEEZE BULLET PRO
