Idiomas disponibles
Idiomas disponibles
1.
Insert adjustable glides (A) into bottom of side
frames. (See Figure 1)
Figure 1
2. Attach support bars to side frames by loosely
tightening 20 M6 x 55 mm bolts (B). Once all support
bars are connected, fully the tighten bolts.
(See Figure 2)
Figure 2
B
PAGE 2 OF 9
ASSEMBLY
A
3. With frame on its side, attach bottom shelf
to support bars using six M6 x 45 mm bolts (C).
(See Figure 3)
NOTE: If shelves are difficult to install, loosen
bolts connecting side frames to support bars.
Tighten after attaching shelves.
Figure 3
4. With frame upright, attach remaining shelves to
support bars using 24 M6 x 45 mm bolts (C).
Tighten bolts with Allen wrench.
5. Attach top panel to top of frame using four
M6 x 55 mm bolts (B). Tighten with Allen wrench.
(See Figure 4)
Figure 4
B
C
0123 IH-10311
