Idiomas disponibles
Idiomas disponibles
IMPORTANT INFORMATION
Please read this instruction manual thoroughly so that you completely understand the operations,
cautions, performance and limitations with this monitor. After reading this manual, please keep it
for future reference.
You should not use this blood pressure monitor for self-diagnosis, self-treatment or to change
medication without consulting your physician or other health care professional. Should you have
any doubt or question about your blood pressure measurements, you should consult your
physician or other health care professional.
This device is contained high-precision parts; therefore, avoid exposing it to extreme temperature
or humidity or to direct sunlight, shock and dust.
Do not attempt to calibrate or repair this monitor. If you have any questions regarding the
function or operation of this monitor, please contact our service agent so we can provide you with
accurate information.
Should the monitor or cuff need cleaning, use a dry, soft cloth or a cloth dampened with water
and a mild detergent. Never use alcohol, benzene, thinner or other harsh chemicals to clean the
monitor or cuff.
Remove and replace the batteries if the monitor is not used for more than 6 months. Alkaline
batteries recommended.
PRECAUTION FOR USE
The Arm Automatic Blood Pressure Monitor is designed to be operated by anyone who is eighteen years
and older or by medical professionals to monitor blood pressure (systolic and diastolic) and pulse rate.
BEFORE YOU START
Please make sure you have installed 4 "AA" (1.5 volt) batteries (alkaline batteries recommended), attach
the cuff to the monitor before using it. To install batteries (or replace them if the "Low Battery" symbol
appears on display), proceed as follows:
Battery Loading
Note：
★ When the LCD display shows "Low Battery" signal
replaced for accurate readings.
★ Do not use rechargeable batteries with a voltage of 1.2Veach because they are
not suitable for this product and will cause inaccurate readings.
★ Remove the batteries if the monitor will not be used for six month or longer to
P-2
★ Remove the battery compartment cover by gently pushing down on
arrow and sliding cover forward.
★ Place batteries with positive "+" and negative "-" terminals into
compartment and make sure they matched the indicated terminals in
the compartment.
★ Close the battery cover by gently sliding it into the compartment and
pressing it into place.
,the batteries must be
