Idiomas disponibles
Idiomas disponibles
off power to radio when battery voltage is low.
•
P--O TUNE (On/Off ): Preset-Only Tune On. If 'Preset-Only
Tune' is set to 'On' in System Settings, only presets from all
bands are recalled in sequence.
•
Tuning Region (USA/EURO/RUSSIA/JAPAN): Set frequency
spacing for various regions.
•
USA Tuning Region (AM > FM > WX > Bluetooth)
•
Europe Tuning Region (AM > FM > DAB+ > Bluetooth)
•
Japan & Russia Tuning Region (AM > FM > Bluetooth)
•
DAB+: Press to ENTER/TIMER button to enter sub-menu.
Press or buttons to navigate list.
•
Announcements: Press to ENTER/TIMER button to
enter sub-menu.
•
New Flash (On/Off )
•
Transport Flash (On/Off )
•
Area Weather Flash (On/Off )
•
Warning/Service (On/Off )
•
Event Announcement (On/Off )
•
Antenna Power (On/Off ): Turn supplied power On
and Off to the DAB antenna.
•
Clock Sync (On/Off ): To synchronize the clock display.
•
Key Beep (On/Off ): Turn the audible beep On/Off (heard
when functions/buttons are selected).
•
Reset System Defaults: Press the ENTER/TIMER button and
then press 2(16) to Confirm. Press the ENTER/TIMER to
return the unit to factory default set up values.
•
System Info: Display firmware version.
NOTE: Bluetooth Device menu options are only available
while the Bluetooth feature is ON and the radio is in Bluetooth
Audio mode.
NOTE: A locked Bluetooth device will not be overwritten from
the list.
Low Voltage Alarm Operation
If Low Voltage Alarm is set to "On, " an alarm will sound (8
beeps every 30 sec) when the voltage drops to 10.5V (+/-
0.3V). A visual warning (LOW VOLTAGE) will appear. Press any
button to dismiss visual warning (reappear every 10-minutes)
in the LCD display.
NOTE: "Off" is the default setting for Low Voltage Alarm. If the
audio is muted or the volume is set to 0, the audible beep will
not be heard.
Liquid Crystal Display (LCD)
The liquid crystal display (LCD) panel (4) displays the
frequency, time and activated functions.
NOTE: LCD panels may take longer to respond when subjected
to cold temperatures for an extended period of time. In
addition, the visibility of the characters on the LCD may
decrease slightly. The LCD display will return to normal when
the temperature increases to a normal range.
9
