Idiomas disponibles
Idiomas disponibles
If the appliance is defective
∙ Return a defective unit to a specialist dealer or customer service for repair (see
contact details in a separate warranty booklet or at www.severin.de).
Connecting the charging base
1.
The charging base must be within reach of a power outlet.
2.
Connect the charging plug of the mains adapter to the charging socket on the underside of the charging base. Pass the
mains adapter cable through the cable guide on the rear of the charging base.
3.
Connect the mains adapter to the power outlet.
Charging the battery with the charging base
Use the charging base to charge the battery before first use. It is recommended to charge the battery before each use,
especially if the appliance has not been used for a while. This extends battery life and ensures the longest possible cleaning
cycles.
1.
Make sure that the appliance is switched off.
2.
Insert the appliance into the wall mount.
∙ The LED on the handle flashes blue. The charging process starts.
∙ When the battery is fully charged, the LED lights up green for 60 seconds and then goes out. When the battery is
empty, the charging process takes approx. 4,5 hours.
TIP: You can leave the unit in the charging station when not in use to ensure it is always ready for use. If you use
the appliance only occasionally or briefly, you should not leave the mains adapter permanently connected to ensure
long battery life.
Choosing the attachment
Select one of the following attachments from the scope of delivery for different applications:
Attachment
Crevice tool
Furniture brush
Without
TIP: Always adhere to the cleaning and maintenance instructions of the floor covering, carpet or furniture
manufacturer. Only use undamaged nozzles. Damaged nozzles can scratch surfaces.
Vacuuming
Vacuuming is carried out with reduced power in Eco mode. The appliance consumes less energy and the operating
time of the rechargeable battery is extended.
button to toggle between Eco and Power modes.
Use the
1.
Attach an additional attachment to the appliance if necessary.
2.
Press the
button to switch on the appliance.
∙ The appliance vacuums in Eco mode.
∙ The LED on the handle lights up blue.
∙ Press the
button to switch to Power mode if necessary.
3.
Vacuum the surface.
4.
Press the
button to switch off the appliance.
5.
Empty the dust container and clean it (see "Cleaning the dust container and filter" ).
Installing and charging the appliance
For cleaning hard-to-reach places.
For cleaning furniture, keyboards or uneven surfaces.
The appliance can also be used without an additional nozzle or brush.
Application
13
