Viessmann VBC135-A60.2 Serie Instrucciones De Montaje página 18

GB
Commissioning
Constant temperature control unit (Vitotronic 100, type HC1B)
1. Press OK and
for approx. 4 s.
2. Use
to select "1" for coding
level 1 and confirm with OK.
"I" flashes on the display for the
coding addresses in group 1.
Weather-compensated control unit (Vitotronic 200, type HO1B
and KW6B)
1. Call up "Service":
Press OK and
for approx. 4 s.
2. "Coding level 1"
3. "Default setting"
Weather-compensated control unit (Vitotronic 200, type HO2B)
After the control unit is switched on, the
commissioning assistant starts.
1. Set the "Language", "Date and
time". After that, do not make any
further settings.
2. Exit the commissioning assistant.
3. Reset the parameters to their fac-
tory settings. See the steps below.
This makes the control unit adopt
the boiler-specific data of the boiler
coding card.
Tap the following buttons:
1. "Menu"
18
(cont.)
simultaneously
simultaneously
3. Use to select "7" and confirm
with OK.
4. " " flashes on the display. Confirm
with OK.
5. Use to terminate service.
4. "Yes"
5. Use to return to "Service"
6. "Terminate service?"
7. "Yes"
2. "Service"
3. Enter password "viservice".
4. "System configuration"
5. "Parameter level 1"
6. "Reset parameter"
7. OK to confirm
8.
9. "Commissioning" to continue with
commissioning.
Boiler installation and serv-
ice instructions