Idiomas disponibles
Idiomas disponibles
• Do not store the unit or fuel in a
closed area where fuel vapors can
reach sparks or an open flame from
hot water heaters, electric motors or
switches, furnaces, etc.
• Store in a dry area out of reach of
children.
SPECIAL NOTICE: Exposure to vibra-
tions through prolonged use of gaso-
line powered hand tools could cause
blood vessel or nerve damage in the
fingers, hands, and joints of people
prone to circulation disorders or abnor-
mal swelling, Prolonged use in cold
weather has been linked to blood ves-
sel damage in otherwise healthy
people, If symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or
joints, discontinue
the use of this tool
and seek medical attention, An anti
vibration system does not guarantee
the avoidance of these problems, Us-
ers who operate power tools on a con-
tinual and regular basis must monitor
closely their physical condition and the
condition of this tool.
SPECIAL NOTICE: This unit is
equipped with a temperature
limiting
muffler and spark arresting screen
which meets the requirements of Cali-
fornia Codes 4442 and 4443, All U.S.
forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey,
Oregon, and Washington
require by
law that many internal combustion en-
gines be equipped with a spark arrest-
ing screen.
If you operate in a locale
where such regulations exist, you are
legally responsible for maintaining the
operating condition of these parts,
Failure to do so is a violation of the
law. For normal homeowner use, the
muffler and spark arresting screen will
not require any service,
After 50 hours
of use, we recomend that your muffler
be serviced or replaced by your Sears
Service Center.
CARTON CONTENTS
Check carton contents against the fol-
lowing list.
Model 358.794201
• Blower
• Blower tube
• Container of oil
NOTE: It is normal for the fuel filter to
rattle in the empty fuel tank.
ASSEMBLY
_!kWARNING:
If received as-
sembled, repeat all steps to ensure
your unit is properly assembled and all
fasteners are secure.
Follow all safety
information
in the manuals and on the
unit.
• No tools are required for assembly.
BLOWER TUBE
•
Push the blower tube into the blow-
er outlet until it snaps into place.
Blower Outlet
Biower Tube
-4-
