Idiomas disponibles
Idiomas disponibles
HARDWIRE ASSEMBLY INSTRUCTIONS
1.
Attach mounting plate (C) to outlet box (not
included) using existing washers and outlet
box screws or the machine screws (BB).
NOTE: If the outlet box screws required for
your outlet box are of a different size than the
machine screws (BB), consult a licensed
electrician before proceeding. Tighten machine
screws (BB) to secure mounting plate (C).
CAUTION: The fixture must be mounted to
an outlet box that is supported by the building
structure and can support the weight of the
fixture. Plastic outlet boxes are not
recommended.
Hardware Used
Machine Screw
BB
2a. Slide plug cap to remove plug (E) from cord.
2b. Remove cord lock (H) from cord
preassembled on fixture (A). Use a flathead
screwdriver (not included) and gently push
screwdriver into small hole in front part of cord
lock (H). Release front and back parts of cord
lock (H) and set aside.
1
Washer
BB
BB
Washer
x 2
2a
2b
H
(Front)
8
C
Outlet Box
Plug
Cap
Cord
H
H
(Back)
E
