KNOW TOASTER
Crumb tray handle
FOR THE FIRST USE
As there is manufacturing residue or oil remained in the toaster or heat element, usually it will emit the odor for the
first use. It is normal and will not occur after several times use, for the first use it is suggested the operation according
to the below steps, except without bread, then let the toaster cool down and begin toasting the first slice.
USING TOASTER
1. Put bread slice into the bread slot which can be
inserted two slices at most every time. Only the
regular slice can be placed into the bread slot.
NOTE: Make sure the crumb tray is completely
positioned in place before using.
2. Plug the power cord into the outlet.
3. Set color control knob to your desired color. There
is 7-position level, the lowest is white and the
highest is puce. The bread slice can be toasted to
golden color at the position of "4".
Note:
1) Toasting color for one side is darker than that for
double bread at the same level.
2) If toasted continuously, toasting color for the
latter bread is darker than the color of previous
cycle at the same level.
4. Press carriage handle down vertically until it is
positioned in place, the indicator of Cancel will be
illuminated, and toasting begins. Once the bread
has been toasted to the preset color, the carriage
handle will be automatically sprung up, and you
can remove the bread readily.
Defrost button
Reheat button
Cancel button
Bred slot
Note: The carriage handle can only be latched
when the appliance connects to the power supply.
5. During the toasted process, you may observe the
toasting color. If it is satisfactory, you may interrupt
the toasting process by pressing the Cancel button
at any time.
6. If the bread has been taken out from refrigerator.
Set color control knob to your desired color. Press
carriage handle down vertically until it is positioned
in place, then press DEFROST button and the
indicator of DEFROST will be illuminated. In this
mode it will be toasted to your desired color.
7. If you want to reheat the cold toasted bread.
Press carriage handle down vertically until it is
positioned in place, then press REHEAT button
and the indicator of REHEAT will be illuminated. In
this mode toasting time is fixed, so long as time is
running over, the carriage handle will automatically
spring up and end up the reheating process.
Carriage handle
Color control knob
5