PNI WB300 Manual De Usuario página 7

- Up key. Press this key to increase the power.
- Down key. Press this key to decrease the power.
10 power levels are available (1.0 Hz - 5.5 Hz).
- Turn on / off the device.
To turn on the air heater, press the ON / OFF button. The start-up is done
gradually, in 2-3 minutes and with medium power (3.0 Hz).
To turn off the air heater, press the ON / OFF button. 0.0 Kz will be displayed
on the screen. Also, the stop is done gradually, in 2-3 minutes. Do not cut off
the power supply until the heater has stopped completely.
Errors
E01 Fuel pump error
E02 Spark plug error
E03 Engine error
E04 Sensor error
E05 Voltage too high
E06 Voltage too low
E07 Control display error
E08 Ambient temperature too high
E09 Sensor error
E10 Ignition error
E11 Temperature too high
E12 Device overheated
E16 Fan error
Simplified EU declaration of conformity
SC ONLINESHOP SRL declares that the PNI WB300 Diesel air heater
complies with the EMC Directive 2014 / 30 / EU. The full text of the EU
declaration of conformity is available at the following internet address: https://
www.mypni.eu/products/9174/download/certifications
7 User manual