Idiomas disponibles
Idiomas disponibles
Cordless power saw
Warnings
•
Remove the power saw from the battery before charging the battery.
•
Install the accessories on the electric saw before mounting the battery.
•
To reduce the risk of injury, wear personal protective equipment when using the power
saw.
•
To reduce the risk of injury, wear gloves when installing/uninstalling the saw blades.
•
When working with the power saw, hold it firmly with both hands.
•
DO NOT use dull, crooked or damaged blades.
•
Choose the type of blade depending on the material you are going to cut (wood, foam,
OSB boards or plasterboard, etc.).
•
Do not cut products containing asbestos. It is toxic.
•
Do not touch the blade immediately after switching off the power saw. It is hot and could
burn your skin.
•
Lock the on/off button when not using the power saw.
Introduction
1.
Lock/unlock the power button
2.
Start/stop button and speed control
3. Battery compartment (battery not
included)
4. Lock/unlock the blade installation
location
Usage instructions
•
Choose the type of blade depending on the material you are going to cut (wood, foam,
OSB boards or plasterboard, etc.).
•
To install the blade, press down on the metal ring where you are going to install the blade,
insert the blade in the correct direction and release the metal ring. Check if the blade
was well fixed, carefully pulling the blade upwards.
•
To remove the blade, repeat the procedure, press the metal ring down, pull the blade out
carefully, release the metal ring.
3
User manual
