Idiomas disponibles
Idiomas disponibles
8.3 AFTER CLEANING
https://www.cdc.gov/healthywater/hygiene/healthychildcare/infantfeeding/cleansanitize.html
for additional breast pump cleaning guidelines.
NOTE: Inspect the tubing. If you find condensation in the air tube, wash and dry it immediately
or replace the tubing. If you see breast milk inside the tubing or tubing connector do not attempt
to wash, clean or sterilize the tubing or tubing connector. Instead contact Hygeia Customer
Service at 714.515.7571.
WASH HANDS THOROUGHLY
!
IF YOU SANITIZE BY BOILING
DO NOT
allow boiling parts to contact bottom of pot. It may cause damage to parts.
WARNING: DO NOT
!
burning. Boiled water and steam from boiled water can cause severe skin burns, so use caution when boiling
parts in water and removing parts from boiling water.
Please check pump kit parts for cracks, chips, tears or deformation before and after sanitization process.
CLEAN TUBING:
It is necessary to wash the tubing only if condensation is present. If condensation is present in the tube,
wash and dry it immediately or replace the tubing. If milk is present in the tubing, do not attempt to wash or clean the
tubing. Instead contact Hygeia Customer Service at 714.515.7571.
HOW TO WASH TUBING:
1. Rinse tubing by pouring cool water and make sure the water flows through the entire tubing from one end to the other.
2. Wash the tubing in warm, soapy water and rinse thoroughly.
HOW TO DRY TUBING:
Hang the tubing to air dry and make sure that the tubing is completely dry before using.
20
|
ENGLISH
1. FOR EXTRA PROTECTION, SANITIZE
For extra germ removal, sanitize pump kit parts, wash basin, and
bottle brush at least once daily after they have been cleaned. Items
can be sanitized using boiling water, or a dishwasher with a sanitize
setting. Items can be sanitized using steam, boiling water, or a
dishwasher with a sanitize setting. Sanitizing is especially important if
your baby is less than 3 months old, was born prematurely, or has a
weakened immune system due to illness or medical treatment
2. STORE PUMP KIT PARTS SAFELY
Store dry items safely until needed. Ensure the clean pump
parts, bottle brushes, and wash basins have air-dried thoroughly
before storing. Items must be completely dry to help prevent
germs and mold from growing. Store dry items in a clean,
protected area.
See the Center for Disease Control website:
with soap and water before touching breast pump, kit and breasts.
leave boiling parts unattended. Remove parts carefully from boiling water to avoid
ART-70295-01-AA
