Idiomas disponibles
Idiomas disponibles
Notes:
• If the product is not going to be used for a long time, please ensure the battery is charged
at least once every 3 months to avoid damage. Plug-and-play function means that you can
use the product while charging in case of insufficient power.
• Put the adaptor connector terminal into the port of the product and then plug into a socket.
Switch on the product and then use it.
• After using, switch off and then disconnect the adaptor connector with product.
• If the battery has been used out, it may be difficult to start the product even if it is plugged.
You should restart it after charging at least one or two minutes. While charging, the product
body and the adaptor may be a little hot, however, it is a normal phenomenon.
• Take the adaptor out from the power socket
• Take the plug out from the product
• Please hold the plug and take it out.
• Don't pull the cord in order to avoid any damage for adaptor.
• Don't charge the product more than 6 hours each time.
DISASSEMBLING
• Use the other hand to hold the cutting
head to prevent it from flying out.
1. Clean the left hair in the cutting head.
2. Hold the moving blade base and clean the left hair.
3. Clean the left hair in the body of the product.
4. Put a drip of oil in each marked part.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
ASSEMBLE AND DISASSEMBLE THE HEAD
HEAD CLEANING
ASSEMBLING
• Insert A into B.
• Turn the control knob into the position of
0.2 mm.
• Press it until a click is heard.
B
A
E NGLI SH
9
