signal flashes and the weight is shown on the display. The word HOLD will be displayed on the screen. This function is
available above 1 kg.
3.7. TARE FUNCTION
This function makes it possible to deduct the weight of the mat or any other textile placed on the scale:
1. Press the ON/OFF button until the scale switches on.
2. Once the scale is at "0", place the added weight on the tray (B) and the weight will be displayed on the screen.
3. Press the TARE button to restore the weight to "0".
4. The measurement can now be taken.
·IMPORTANT:
-When removing the mat from the tray, the TARE button must be pressed again, otherwise a negative weight will be shown
on the display and the weight obtained will not be accurate.
4. CLEANING AND MAINTENANCE
· SCALE AND TRAY: use a soft cleaning cloth,
moistened with a little water if necessary.
Do not use aggressive or abrasive detergents or
solvents.
· MAT: follow the instructions on the label for proper
maintenance.
5. TROUBLESHOOTING
PROBLEM
SOLUTION
THE SCALE DOES NOT SWITCH ON
- Check that the batteries work.
THE SCALE SWITCHES ON, DIS-
- The device has run out of battery power. Replace the batteries as described in
PLAYS LOW AND SWITCHES OFF
section 3.1 INSERTING BATTERIES.
THE MEASUREMENT ON THE
- Make sure the scale is on a flat, stable surface.
SCALE DOES NOT STABILISE
- Check all the pads are present on the base.
- Make sure the baby does not move too much.
- Try using the MANUAL HOLD function.
THE SCALE DOES NOT CONNECT
- The device may have run out of battery power. Replace the batteries as
TO THE APP
described in section 3.1 INSERTING BATTERIES.
- Make sure the smartphone's Bluetooth connection is enabled.
- Press the button ON/OFF button (A) for a few seconds until the Bluetooth icon
begins to flash.
- Follow the steps described in section 3.5. USING THE SCALE (WITH OR
WITHOUT THE TRAY) WITH THE APP.
THE SCALE DISCONNECTS FROM
- The device may have run out of battery power. Replace the batteries as
THE SMARTPHONE
described in section 3.1 INSERTING BATTERIES.
- Make sure the smartphone's Bluetooth connection is enabled.
- Make sure the scale is not switched off. If it is, press the ON/OFF button (A) for
a few seconds until the Bluetooth light begins to flash.
- Make sure the distance between the device and your smartphone is less than
5 metres.
A NEGATIVE WEIGHT IS
-Press the TARE button as explained in section 3.5. and make sure 0.00 is
DISPLAYED ON THE SCREEN
displayed on the screen.
"ERR" IS DISPLAYED ON THE
- Take the baby/person off the scale.
SCREEN
- Start a new measurement.
AN ANOMALOUS WEIGHT IS
- Check that the measuring units are correct (kg, oz, lb, lb:oz).
DISPLAYED ON THE SCREEN
Our Customer Service department is available to answer any other questions you might have either by
6. TECHNICAL SPECIFICATIONS
Standard for execution of technological parameters
product name: electronic baby scale
Model: BS01/1
Power supply: 2 Batteries *AAA
Measuring range: 50 g to 100 kg.
Resolution:
-From 50 g to 30 kg: 0.01 kg
-From 30 kg to 100 kg: 0.1 kg
Weight range
Allowed weight deviation
0-1 kg
±20 g
1-3 kg
±30 g
3-5 kg
±50 g
5-10 kg
±60 g
10-20 kg
±70 g
20-30 kg
±80 g
30-100 kg
±300 g
This appliance complies with the essential requirements established in the
current EU directives.
Caution
Instructions for use
In the EU this product should not be disposed of with other household waste in order to avoid
harming the environment or human health. It must therefore be recycled correctly, promoting the
sustainable reuse of material resources. To return the used appliance, please use the designated
recycling systems or contact the establishment where you purchased the product. They will
dispose of this product appropriately so that it can be safely recycled.
This product complies with EU Directive 2012/19/EU. The crossed-out wheeled bin symbol on the appliance indicates that
the product must be disposed of separately from other household waste at the end of its useful life, either by taking it to a
selective collection centre for electrical appliances or by returning it to the distributor when you purchase another similar
appliance. The user is responsible for taking the appliance to a special waste disposal centre at the end of its useful life. If the
unused appliance is correctly collected as separated waste, it can be recycled, processed and eliminated ecologically. This
prevents it having a negative impact on the environment and health and helps ensure that the product materials are recycled.
For more information on available waste disposal services, contact your waste disposal office or the shop where you bought
the appliance.
Google and Google Play are trademarks of Google LLC.
EN
CE conformity:
This SCALE Model: BS01/1 complies with all the essential
requirements and other provisions specified in EU Directives
2014/30/EU (electromagnetic compatibility), 2014/35/
EU (electrical safety), 2011/65/EU (restriction of hazardous
substances - RoHS), 2012/19/EU (waste electrical and
electronic equipment - WEEE) and 2014/53/EU (radio
equipment directive - RED). To request a copy of the CE
declaration of conformity, please contact the manufacturer:
EXCLUSIVAS RIMAR, S.L. - C/ del Rublo parcelas R83 – R94
Polígono Las Atalayas 03114 - ALICANTE - ESPAÑA/SPAIN -
C.I.F: B03074093
- 31