Motorola nursery VM75 Guia De Inicio Rapido página 6

Ocultar thumbs Ver también para nursery VM75:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 19
4.2 Connecting the Power Supply for Parnet Unit
• Plug the DC plug of power adapter(DC5V/1000mA) into the Parent unit,
connect the other end to a suitable electrical outlet.
• Leave to charge for 16 hours.
Note
The first time you use the Parent unit, or if you haven't used it for a long time,
it will take 16 hours to fully charge.
The battery life on a single charge lasts for 4 hours. We recommend you keep
the cable plugged into the mains power socket if you're going to use for longer
than this or throughout the night.
When the battery gets very low, it'll take about 30 minutes to charge enough
for you to use it for a short time. To charge the Parent unit in the shortest
amount of time, turn it off while it's charging.
• After the Parent unit has charged for 16 hours you can switch it on.
• Before you do, move the Parent unit at least 3 feet from the Baby unit. Any
closer and you might get audio feedback sounds.
• Press and hold the button
and camera unit are automatically linked and ready to use.
6
to turn the monitor unit on, the monitor unit
loading

Este manual también es adecuado para:

Nursery vm75-2Nursery vm75-3Nursery vm75-4