Only use the supplied components for the bracket installation.
Angle Adjustment Bracket
Safety Instructions
Be sure to contact an authorized service center when installing your set.
Contact a qualified technician at your dealer for
moving or replacing the product after the installation.
1. Be sure to keep the product away from children. There can be serious damage on the head when hit by the edge of the product.
2. Be careful when you adjust the angle or rotate the set. The product can be damaged if it is too close to touch the wall.
(Attach some sponges to 4 corners of the product to avoid the product or wall damage.)
3. Do not install the product in a place with high temperature and high humidity. Avoid to install the product on the wall which cannot bear the weight.
4. Since there is a danger of electric shock, do not insert your fi ngers into the TV stand installation hole while installing the TV.
5. Make sure to cover the TV stand installation hole with the hole cover supplied with the TV before completing the wall installation.
WMN4277TT
Bracket
1
Left : 1
Right : 1
English
Accessories
Screws ⓒ : 4
M8 x L37
Plastic hangers : 4
Screws ⓐ : 8
Screw ⓑ : 8
Anchor : 8
Do not hang on or give sudden impacts to the product.
Guía de instalación del soporte de pared del tipo rotación con ajuste de ángulo WMN4277TT Imagen del producto Componentes En la instalación del soporte use solo los componentes suministrados. Soporte de ajuste de ángulo Soporte Accesorios Tornillos ⓒ : 4...
Montaje del soporte mural [ Compruebe el tipo de pared antes de la instalación. Requisitos de la instalación estándar según el tipo de pared • Solo se puede utilizar una pared de cemento o una pared interior con el grosor suficiente. Consulte las siguientes ilustraciones. Mín.
Página 43
Asegure el equipo a la pared. Tire del soporte hacia adelante y despliéguelo. Inserte el soporte en la zona asignada del soporte de ajuste de ángulo y apriete los 8 tornillos ⓑ suministrados. (Por ambos lados, derecho e izquierdo) Tornillosⓑ 4 unid. Tornillosⓑ...
Página 44
Tire hacia adelante la pieza de fijación del soporte de pared. Se necesitan dos personas para instalar el producto en el área asig- nada del soporte de la pared. Instale el aparato de televisión en el soporte de la pared y gire las 2 patillas de seguridad de la parte superior para asegurar el equipo.
Ajuste del ángulo del soporte de pared Este producto consta de un mecanismo de movimiento suave que permite moverlo según convenga. Ajuste el ángulo de instalación y después instale el televisor cerca de la pared. No fuerce el equipo para ajustar el ángulo. El producto se podría dañar si se halla muy próximo a la pared.