Atmor InLine 900 Serie Guía De Instalación Y Funcionamiento página 6

07
Run the water flow for
one minute to check for
leakage before connecting
to power.
09
Reattach the front cover of the heater and
secure it with 4 screws and then slide the
bottom gray cover
11
When installed outdoors,
the heater must be placed in
sealed waterproof electrical
box.
13
It is recommended that the appliance electrical
connections be tested once a year by a qualified
technician.
5
08
Connect the power cable to the terminal
block.
Caution: The heater must be grounded.
Reference figure *3 on page 4 and
Electrical diagram on page 6
12
Do not install the heater where
it may be subject to direct
sunlight.
10
Make sure that the
appliance is filled with water
before connecting power.
(Repeat step 7)