Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
IQAmerica.
Wired+Wireless Designer Doorbell
Model PC-7210
Instructions - Please retain these instructions for future reference.
You have purchased a Universal Door Chime that serves all residential applications. It can be installed
as a Wired chime, where the power is supplied by a transformer with wires, or it can be a Wireless
chime powered by 3 C cell batteries. Use the following guidelines to assist you in deciding the mode
that best serves your application:
If you are building a new house:
The Wired mode would be best if you are having an electrician install the door chime.
The electrician will install a transformer and run the wires for the door chime as well as pushbuttons.
You can also elect to use the Wireless mode. However, the batteries in the chime and
pushbuttons will need to be replaced periodically.
If you are replacing a working Wired Doorbell:
The Wired mode would be the best option.
If you have a wired doorbell, but it doesn't work:
First install this chime in the Wired mode. Connect the wires as explained in the section
"Replacing a Wired Doorbell". If the chime worKs, this is the best option.
If the chime does network, purchase either 1 or 2 IQ America Wireless Pushbuttons and follow the
instructions for the Wireless mode.
If your home does not have a wired doorbell, you should use the Wireless Mode.
This package contains:
Universal Chime and Decorative Cover
2 screws and 2 wall plugs for installing door chime
.
1 Diode
= ^ = -
WIRED MODE: New Installations
New installations will require a 16V 10W transformer. It is suggested that this be installed by
a licensed electrician.
You will require: (for Wired option)
A small Phillips head screwdriver.
A small Phillips head screwdriver.
(For new installations} Transformer 16V 10W (IQ America DT1610)
(For new installations) 2 Doorbell Pushbuttons
4 screws for installing doorbell pushbutto
1 Diode
Remove Decorative Chime Cover
Remove the decorative cover by simply pulling it away from the rear casing. When replacing
the cover, simply press it back on the base.
Install the Door Chime (Refer to Figure 1)
Position the chime as shown in Figure 1. (The chime base can also be installed in the
horizontal position.) Route the wires as shown and install the chime using the screws provided,
Figure 1
Figure 2
REAR PUSH
REAR
Transforms
Supply
Output
Install the Front Doorbell Pushbutton (Refer to Figure 2}
A small electrical component called a 'diode' is supplied with the chime. Install the diode across the
terminal screws of the Front Doorbell pushbutton as shown in Figure 2 & 3. Without this diode the
chime will not work. Connect the wires to the Front Doorbell Pushbutton. Install the Front Doorbell
Pushbutton in the desire location using the screws provided.
Install the Back Doorbell Pushbutton (Refer to Figure 2)
Connect the wires to the Back Doorbell Pushbutton. Install the Back Doorbell Pushbutton in the desired
location using the screws provided (No diode required).
Wiring Instructions For New Installation (Refer to Figure 3)
1. Turn off the power supply,
2. Connect one wire from the Front Doorbell Pushbutton to the FRONT terminal of the Chime Base.
3. Connect the other wire from the Front Doorbell Pushbutton to one Terminal of the Transformer.
4. Connect the TRANS
terminal of the Chime to
the other Terminal of the
Transformer.
5. If the Back Doorbell
Pushbutton is used,
connect one end of the
wire from the Back
Doorbell Pushbutton to
the REAR terminal of
the Chime.
6. Connect the other end of
the Back Doorbell Pushbutton
to the 1 st Terminal of the Transforr
7. Turn on the power to the doorbell,
8. Press the doorbell pushbutton. The chime should respond with a tune. If not, go to the
Troubleshooting section.
Replacing a Wired Doorbell
1. Turn off the power supply.
2. Remove the decorative cover by simply pulling it away from the rear casing. When replacing
the cover, simplv cross it back on the base
3. Use tape to mark the wires and then disconnect the wires from doorbell.
4. Position the chime as shown in Figure 1. (The chime base can also be installed in the
horizontal position.) Route the wires as shown and install the chime using the screws provided.
5. Connect the wires to the Door Chime.
FRONT PUSH
Figure 3
Figure 4
6. A small electrical component called a 'diode' is supplied with the chime. Install the diode
across the terminal screws of the Front Doorbell pushbutton as shown in Figure 2 & 3.
Without this diode the chime will not work. Connect the wires to the Front Doorbell Pushbutton.
Install the Front Doorbell Pushbutton in the desire location using the screws provided.
7. Turn the power on.
WIRELESS MODE
You will require: (for Wireless option)
A small Phillips head screwdriver.
Doorbell Pushbuttons
3 C cell batteries
2 screws for installing doorbell pushbutton
1. Install the door chime using the hardware supplied.
2. Mount the IQ America Wireless Pushbutton following the
instructions provided and install the battery in the pushbutton.
3. Insert the C cell batteries in the order shown in Figure 4.
The Chime will play all of the tunes that are available when it is first powered up.
4. Program the wireless IQ America pushbuttons to the door chime
a. Press the front door pushbutton. The door chime will respond with a chime.
b. Program a second pushbutton at this time. Programming must be completed within
2 minutes of programming the first pushbutton. If more than 2 minutes has elapsed, go
to the To Reset the Chime Programming.
To Reset the Chime Programming, press and hold button A and B (Fig. 5) until the chime
sounds. The chime will play all of the tunes available indicating that previous programs have been
erased. Return to the Program trie Doorbell Pushbutton Transmitter and repeat section.
Sound Selection: Refer to Figure 5 to select the sound
1. Press button A until the desired tone for the front doorbell is heard (See Tune Options Table).
Press the Front Doorbell Pushbutton to test the chime, (The chime tone can be changed at any
time by simply pressing this button to select another tone,)
2. If a Back Doorbell Pushbutton is used. Press button B until the desired tone is heard. Press
the Back Doorbell Pushbutton to test the chime.
3. Adjust the volume with the volume adjustment knob C.
Chime Options Table
6. Birthday Song
L ^ i i
1. Big Ben 2notes
2. Big Ben Snotes
3. Traditional 1note
4. Traditional 2notes
5. Traditional Snotes
7. Merry Christmas
8. Auld Lang Synn
9. Beethoven
10. U.S. National Anthem
Replace the Decorative Chime Cover
as shown in Figure 6. Position the decorative
cover and press down until it snaps in place.
The cover can be installed in either direction.
Figure E
Check that all batteries
light should come on whe
ave been inserted c<
the pushbutton is prt
rectly. The doorbell pushbutton LED
;ed.
Chime may be positioned out of range of the doorbell pushbutton.
Move your chime closer to the doorbell pushbutton.
Note: During the programming cycle, the transmission range may be
reduced and will resume optimum range after 2 minutes.
A metallic object may be blocking the signal from the doorbell pushbutton,
Experiment with the location of the chime to see if you can move it in to a more si suitable place.
The doorbell pushbutton and chime haven't been prograi
Reset the automatic programming of your chime and doorbell
Cammed.
holding down chime selection buttons A and B (Figure 5) for 5 seconds. The chime will sounc
all of the tunes available indicating the programming has been erased. Program the doorbell
pushbutton following the installation instructions.
For any other problem, call 1-800-296-1869 Mon-Fri between 9 am and 5pm EST
IQ America Five Year Warranty
This
is
a 'Limited Warranty" which gives you specific legal
rights
Fof a period of five years from
the
date
of
purchase, any malfunction caused by factory
return the product to the place of purchase.
NOT COVERED: Repair service, adjustment and calibration due to misuse abuse or
negligence Unauthorized service or modification of
the product
or of any furnished component will void this
warranty. This warranty does
not include
reimbursement for inconvenience, installation, setup time, loss of
use or unauthorized service.
This warranty is expressly in lieu of all other warranties, express or implied, including any
warranty, representation or condition of merchant ability of that the products are fit for any particular purpose
Repair er roela&smonl oholl be Ihc aolc rcmcGi
ff
the ouMuiner and Ihere
shall
Dm nn nanimi
on tne part ot IU America tor any special, indirect, incidental or consequential damages, including but not
limited to any toss of business or profit, whether or not foreseeable. Some states or provinces do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you. Retain receipt for warranty claims.
__^
u may a
