Idiomas disponibles
Idiomas disponibles
EN Safety and maintenance instructions
1.
Please read this operation manual carefully before use.
2. The safety and maintenance instructions in this operation
manual should be retained for future reference and must be
followed at all times.
3. Keep the product away from heat sources such as radiators,
heaters or other appliances that produce heat.
4. Place Bell in a stable position to avoid fall and cause
damage or personal injury.
5. Do not expose the product to direct sunlight for longer
periods. High temperatures may shorten the life of the
product, destroy the battery and distort certain plastic
parts.
6. Do not expose the product to extreme cold as it may
damage the internal circuit board.
7.
Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles varies by
use and settings.
8. Avoid liquids getting into the product.
9. Before wiping with a dry cloth to clean Bell, set the power
switch to the off position and unplug the power cord from
the power outlet.
10. Do not throw with or stamp on the product. This may
damage the internal circuit board.
36
11. Do not try to disassemble the product. This must only be
done by a professional.
12. Do not use concentrated chemical products or detergent to
clean the product.
13. Keep the surface away from sharp things, as these may
cause damage to the plastic parts.
14. Use 5V / 1A power supplies only. The connection of power
supplies with higher voltage may lead to severe damage.
15. Do not arbitrarily discard or place the lithium battery near
fire or intense heat in order to avoid a risk of explosion.
If you do experience any problems with your product please
contact the retailer you purchased the product from. The
retailer will provide you with guidance and if that does not solve
the problem, the retailer will handle the claim directly with
Kreafunk.
37
