Idiomas disponibles
Idiomas disponibles
IRC-Connect
Technical Data
Environmental conditions
Indoor use only
Altitude
Ambient temperature range
Maximum relative humidity
80 % for temperatures up to
31 °C decreasing linearly to
50 % relative humidity at 40
°C
Environmental class
Pollution degree
Radio module characteristics
IRC-B
Output frequency
Maximum conducted output
power
Maximum radiated output
power
Receiver conducted sensitiv-
ity
Dimensions and weight
A
B
C
[mm]
[mm]
[mm]
110.1
55
62.5
Up to 2000 m
+5 to +40 °C
(+41 to +104 °F)
II
2
2.402 - 2.480 GHz, ISM band
11 dBm
14 dBm EIRP (including
maximum antenna gain 3 dBi)
-90 dBm
D
E
Weight
[mm]
[mm]
[g]
61.3
55
360
© Atlas Copco Industrial Technique AB - 9836 6341 00
Battery
Supplied with the product.
• Rechargeable Li-ion battery, 3.6 V 3.35 Ah and/or 6.2 V
2 A
• Battery life:
• 6 hours (standalone usage)
• 5 hours (continued communication usage)
• Charging time: maximum 4 hours
External power supply
• Input: 100-240 V~ 50/60 Hz, 0.6 A
• Output: 5.95 V
3 A, 18 W
• Overvoltage category: II
Declarations
Liability
Many events in the operating environment may affect the
tightening process and shall require a validation of results. In
compliance with applicable standards and/or regulations, we
hereby require you to check the installed torque and rotational
direction after any event that can influence the tightening re-
sult. Examples of such events include but are not limited to:
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures or
practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair of
the equipment.
• Occur at least once per shift or at another suitable fre-
quency.
EU DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that the product (with name, type and serial number, see
front page) is in conformity with the following Directive(s):
2011/65/EU (RoHS), 2015/863/EU (RoHS amendment),
2014/53/EU (RED)
Harmonized standards applied:
EN 301 489-17 v3.2.4, EN 301 489-1 v2.2.3, EN 300 328
v2.2.2, EN 62479:2010, EN IEC 61326-1:2021 IEC
61326-1:2020
Safety Information
3
