Idiomas disponibles
Idiomas disponibles
1 Generalities
This manual covers the use of winches MOTRIX
type 526 or 527 (and the versions listed in §1.4).
1.1
Description of the machine
The MOTRIX is a portable electric reeving hoist for
unlimited
hoisting
instructions on the hoist plate: Type 526J, 527B,
527E, 527N or 527D).
The standard equipment includes:
- the unit with its carrying handle (telescopic on
527) and the safety hook; engine with main brake
and protected by thermal probe
- 2 travel end stopper
- 1 pendant control station (2,5 m) double insulation
IP 65 with 3 button: ascent, descent and emergency
stop (extension: until 200 m maximum and 40 m
suspended maxi.)
- Male/female plug and cable power (0.50m)
- 1 manual
The MOTRIX winch cannot be used to lift
or move people or dangerous goods.
1.2
General description.
Diagram of typical installation:
INSTRUCTION MANUAL
Electrical winches MOTRIX types 526&527
cable
movement
(check
This winch is designed for the lifting and traction of
loads. It is intended for professionals involved for
work, such as in an elevator shaft or on building
facades. The winch uses one steel cable (hoisting
cable).
The drive system consists of a pulley whose throat
has a special profile, and in which the cable is tight
by two articulated rollers. This allows an unlimited
run of the hoisting cable.
This technical design ensures a great security
provided you follow the instructions given in this
manual.
Each device carries labels information and
instructions. Constantly make sure that all these
labels are in place and legible.
The MOTRIX winch must be used exclusively with
special lifting cable, to fully ensure the safety and
efficiency.
Before its expedition by Fixator, each hoist is tested
to 110% of its capacity.
Additional kits exist:
ref : 030050
ref 030060 (max 1000kg)
ref 542112 (type 526J)
Ref: 1813000210
Page: 3/21
Version: 42/22
ref 030052
ref030054 (type 527E
527N)
