2—Stainless steel blade operate with higher speed
than grade 1 but lower speed than grade 3..
3—Stainless steel blade operate with higher speed
than grade 2 but lower speed than grade 4.
4—Stainless steel blade operate with higher speed
than grade 3 but lower speed than grade 5.
5—Stainless steel blade operate with higher speed
than grade 4 and it is the highest speed of the
machine.
0—turn off the unit.
Pulse position
Caution
1. Over-filled can block the operation, please turn off
the unit and do not connect the plug, take out some
of material, then operating.
2. Do not use unit continuous more than 2 minutes.
Cleaning and storage
• In addition to this, you must refer to the security
precautions.
• Do not clean Motor main body, power cord and
plug with water.
• Clean the engine base with a soft, wet piece of
cloth and some mild cleaning agent.
• Fill the jug half-full with hot water and a little
cleaning agent. Let the unit run on speed 2 until the
jug is clean.
• The base with the blades can be taken apart. Screw
of the base counter-clockwise. Take out the blades
together with sealing ring facing upwards.
• Now clean jug, cover, closure, base and blades with
sealing ring with hot water and some cleaning agent.
Dry well before re-using. Caution! The blades inside
of the jug are very sharp.
• Never use aggressive cleaning agents.
Warning
Do not to touch the sharp blade. When clean, please
wipe by dishcloth, to avoid accidentally injure.
Warning
Do not to touch the sharp blade. When clean, please
wipe by dishcloth, to avoid accidentally injure.
Specification
Rated voltage: 220-240V/ 50/60Hz
Power: 600W
Capacity: 1.5L
Operating time: 2 minute
Stop position
NOTE
1. Unit suitable for household.
2. Do not use for commerce. Otherwise the maintain
Speed adjust
service will invalid.
from low to
high