Idiomas disponibles
Idiomas disponibles
Caution
Switch off the unit before clean it to avoid creepage
and other dangers. When the plug or power cord
have damage, do not use the unit, even not to
disassembly by yourself, must be inform the after-
service center to handle.
Special security precautions
• Caution: The blades of the jug are very sharp. There
is a danger of injury! While the blades are turning,
never touch the jug from the inside and never put
any objects inside.
• Only use equipment endorsed by the manufacturer.
• Only use the unit with tightly closed cover and
inserted closure.
• The unit is equipped with a security function. The
unit can only be switched on if the jug is put on the
engine base properly. If the unit cannot be switched
on, pull the power cable and check the connection
between jug and engine base.
Parts item
1. Feeding lid
2. Lid
3. Glass jug
4. Knife holder
5. Rubber gasket
6. Locking ring
7. Motor part
8. Rubber feet
9. Speed selector
Installation
7. Clean the measuring cup, cover and jar (except
main body) and so on before first using.
8. To make sure the unit is turned off and not to
connect before installation.
9. First ring the jar sealed ring into blade base, then
enclose the blade base into jar, last rock the jar
slightly causing it to lock into place.
10. Fit the blender glass jar onto the main body, and
turn it slightly in a clockwise so it locks with the
motor section. Fill the jug with the desired foods.
Please ensure the water not spill over from cup. (
Maximal water capacity cannot exceed 1500 ml)
DO NOT USE THE UNIT WITHOUT ANY MATERIAL
INSIDE.
11. Put the cover on top of the jar and push it down.
Insert the closure into the cover and turn till it locks
into place.
12. Place the measuring cup on the center of cover,
anticlockwise rock the measuring cup slightly.
Operation
8. Connect the power
9. This unit have safety design, it do not work if the
jar is not install on main body properly.
10. Turn the turning knob P/0/1/2/3/4/5 to position
0 in order to make sure the unit is turned off.
11. Fill the jug with the desired foods
12. Put the cover on top of the jar and fix it. Place the
measuring cup on the center of cover, anticlockwise
rock the measuring cup slightly.
13. Put the blender glass jar onto the main body,
and turn it slightly in a clockwise so it locks with the
motor base. and the machine was fully assembled.
14. Turning the knob to required speed (P—pulse,
grade 1 to 5 means speed of blades from low to high).
Speed adjust
P—pulse –Stainless steel blade operate with
transitorily highest speed, suitable for ice.
1—Stainless steel blade operate with low speed.
