AKASO BRAVE 6 PLUS Manual De Instrucciones página 17

EN
This option helps you set the exposure time in Long exposure mode. The camera
will taking photos until the set time comes to the end.
Note: This feature is available in Long Exposure mode only.
7. Exposure Value
-2, -1.7, -1.3, -1.0, -0.7,-0.3, 0, 0.3, 0.7, 1.0, 1.3, 1.7, 2 (Default setting: 0)
By default, your camera uses the entire image to determine the appropriate exposure
level. However, Exposure lets you select an area that you want the camera to prioritize
when determining exposure. This setting is particularly useful in shots where an
important region might otherwise be over-or underexposed. The camera will display
changes in the image the instant you change the setting. It will resume using the
entire image to determine the appropriate exposure level if you switch modes.
8. ISO
Auto / 100 / 200 / 400 / 600 / 800 / 1600 / 3200 (Default setting: Auto)
ISO determines the camera's sensitivity to light and creates a trade-off between
brightness and resulting image noise. Image noise refers to the degree of
graininess in the image. In low light, higher ISO values result in brighter images,
but with greater image noise. Lower values result in lower image noise, but darker
images.
9. Meter
Center / Average / Spot (Default setting: Average)
This option allows you to set the metering mode for different scenes. You can
choose a desired meter mode according to the scene.
10. Photo Quality
Fine / Normal / Economy (Default setting: Fine)
This option determines the level of detail in your photos.
14