HANDI-MATE JR.@
For operation of Handi=Mate
Jr.®
Handi-Mate Jr.®
see separate
Owner's Manual.
Handi-Mate
Storage
TO INSERT
HANDI-MATE
JR ®
Place Handi-Mate Jr.®into the storage
compartment.
Rotate the Handi-Mate
Jr._ back until it
snaps into place.
TO REMOVE
HANOI-MATE
JR. °
Rotate Handi-Mate Jr.®out of the storage
compartment.
TELESCOPIC WAND
PLACEMENT
Place the telescopic wand in the wand
holder. Place the crevice tool in the top of
the telescopic wand.
Tool
Wand
Wand
Holder
OPERATING INSTRUCTIONS
1. Turn the quick
release upper
cord hook to
either side and
down to release
the power cord.
• To reduce the risk of electric shock,
this vacuum deener has a polarized
plug (one blade is wider than the
other).
• The Plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified
technician to install the proper ouUet.
Do not change the plug in any way.
2. Detach the
Locking-
power cord plug
Notch
from the power cord
and pull the cord off
the quick release
upper cord hook.
Power
Be sure the power
cord is still locked
into the locking notch of the upper cord
hook.
3. Plug the polarized
power cord into a 120
Volt outlet located
near the floor.
4. To replace cord, turn upper cord hook to
the up position, then wrap cord.
Personal Injury and Product Damage
Hazard
• DO NOT place hands or feet under
the unit at any time.
• DO NOT use outlets above court-
tens. Damage from cord to Items in
surrounding area could occur.