Idiomas disponibles
Idiomas disponibles
Review this table to find do-it-yourself solutions for minor performance problems. Any service
needed, other than maintenance described in this Owner's Manual, should be performed by a
Sears or other qualified service agent.
_:.:..._.-
.
_
.7:. _. _._.:
Vacuum cleaner
won't tun.
Pc_rjobofdirt
pick*up.
1. Unplugged at wall outlet.
2,
3.
4.
Tripped circuit breaker/blown fuse
2.
at householdservice panel.
Thermal protectortripped.
3.
Defective wall outlet.
I,
Fullor cloggeddust bin.
2. Wrong pile height setting.
3. Worn agitator.
4. Clogged nozzle.
5, Clogged hose.
6, Hole in hose.
7.
8.
1. Plug in firmly,select the desired set-
ting on the touch control,
Reset dmuit breaker or replace fuse.
4.
Hose not inserted fully.
7.
Motor protectionsystem activated.
&
Allowvacuumcleaner to cool, then
reset thermal protector.
Check w_tha good appliance/lamp,
have properly s_rviced.
1. Empty dust bin.
2. Adjustsetting.
3. Take to yournearest Sears
Service Center.
4. Check CLOG REMOVAL.
5. Check for clogs.
6, Take to yournearest Sears
Service Center.
Insert hose fully.
Check for clogs.
(change of sound)
g. Dirty filters,
g. Change filters.
Vacuum Cleaner picksup
1. Wrong pile height setting.
1. Adjust setting.
moveab_ rugsor
pushes too hard,
Lightwon't work.
1. Burned out lightbulb.
1. Change light bulb.
Agltafordoes notturn.
1. Handle in full upright position.
1. Move handle from upright position.
2. AgitatorOverload tripped.
2. Reset Agitator Overload.
3. Thermal protector tripped.
3. Allow vacuum to cool, then reset
thermal protector.
Ainlow restricted
1. Attachment use restrictsair flow.
1. Check ATTACHMENTS for fuzz, lint.
with attachmentuse.
pet hair or other debds.
Sound changes.
2. New carpet fuzz clogged air palh.
2. Check CLOG REMOVAL and clean
hose,
D_ffleulty adjustingpile
1. Vacuum cleaner not in properupright
1.
height set6ng
position.
Place vacuum cleaner in the locked
uprightposition,tiltthe vacuumback
slightlyand adjust pile height,
2O
