Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Using the auto shut-off
When the alarm goes off...
Customizing the alarm
By default, the audible alarm keeps sounding until you turn it off (or until the sensor no longer senses water). You can
also set the audible alarm to sound for 10 seconds only.
To change the audible alarm to 10 seconds only: Press and hold the Alarm Off button for 2-3 seconds. The yellow LED
flashes to show that you've changed the audible alarm to 10 seconds only. To change back, press and hold the Alarm
Off button again.
Once you've fixed the leak and dried off the sensor...
If the sensor senses water, the alarm sounds and the valves close. The yellow
and red indicators on the control box start flashing.
You will also receive a notification on your phone saying "Device has been
triggered. Automatic shut-off activated."
To stop the audible alarm: On the control unit, press the Alarm Off button. (The
valves will still be closed.)
Press and release the Test/Reset button on the control unit. The yellow light
flashes while the valves are reopening. The green light comes on when they
have finished reopening.
15
Tabla de contenido
