Idiomas disponibles
Idiomas disponibles
6
Once you apply the HOST
Dry Extraction Cleaner to the
floor, turn the foot switch at
the base of the Reliant ON.
Work HOST into the soiled
area, using push-pull strokes
just like when you vacuum,
make three passes over the
area (1.5). This brushing
action distributes the HOST
micro-sponges and brings
them in contact with the
dirty surfaces of what you
are cleaning.
7
Allow the HOST to dry. Use a
standard vacuum to vacuum
the area in two directions:
north/south and east/west.
Continue to vacuum in two
directions until all visible
HOST is recovered.
8
NOTE: CLEAN AND ROTATE
BRUSHES HOURLY. The
brush bristles acquire a
"set" in the direction they
revolve unless switched
regularly. Unplug machine
from power. Press spring
lock button to release brush
guard/end cover. Pull back
on clip; li out brushes.
Remove brushes and clean
out underside of machine.
Switch brushes to opposite
drive sha s. Brushes fit
down over sha and engage
on 3 pins near bottom of
sha . Be sure brush clip
snaps into position. Insert
hinged bar of brush guard/
end cover into lower
slot. Push all the way up,
depress lock button and
slip brush guard into place.
Reliant brushes can also
be switched end-to-end
if desired. Remove screw
holding brush clip in place,
reassemble at other end of
brush and replace.
THE CLEANING SYSTEM that makes A DIFFERENCE
9
1st Pass
2nd Pass
3rd Pass
(1.5)
Spring
Lock
Button
hostdry.com | 800-558-9439
Return the Reliant to the
caddy by locking the handle
in place and turn machine
brushes ON and guide it
back into the caddy. Lock
bolt back into place. Simply
wheel the Reliant away.
Pull Handle
Out
Li and
turn handle
release knob
1/4 turn
When Cleaning
Stairs with
the Reliant
To clean the stairs with the Reliant, handle will
need to be removed from the machine. Unwind
the power cord from the handle. Press in the
clips on the cord end and pull up to unplug cord
from power cord receptacle. Unscrew handle
locking knob completely. Lower the handle to a
90° angle (parallel to the floor). Li and turn the
handle release knob on top of the li ing handle
1⁄ 4 turn. Slide the handle straight out to the side.
Use the base to clean stairs.
Removing Spots with the
HOST spotZAPPER®
Spots can also be removed using the
HOST spotZAPPER. Apply HOST Dry
Extraction Cleaner and brush in many
directions. The more brushing, the better.
A er brushing, let dry and then vacuum.
Locking
Caddy
Bolt
Unscrew handle locking
sha completely, lower
handle parallel to floor
and slide handle out
7
