Idiomas disponibles
Idiomas disponibles
The attached
hose swivels to
make cleaning
easier in every
Hose
direction.
Clip
Remove the
hose from the
hose clip by
pulling straight
out.
TELESCOPING WAND WITH
SUCTION CONTROL SLIDE
SOME
MODELS
Crevice
Remove the
Tool
telescoping
wand from
Telescoping its storage
Wand
position.
Remove the
crevice tool from its storage position in the
wand. Turn the locking ring to the UNLOCK
position.
Extend the wand to its full length. Turn the
locking ring to the LOCK position. Attach the
extension
wand onto the open end of the
hose.
Lower_._
_
Suction
Wand"""_'_.r_
Control
Slide
f
Wan.
_ . _..._
Locking
Ring
|-
Unlock
_
Upper
Wand
Align the tabs on the extension wand with
the "J" slots in the hose. Push the wand into
the hose and twist to the right to lock.
To achieve maximum
reach
with the attachments,
add the
crevice tool to the end of the
wand by inserting and
twisting slightly.
Hose-
Suction
Control
CreviceTool
"Raised
When using the dusting brush or the com-
bination brush, they may be attached
directly to the wand or placed on the end of
the crevice tool.
Dusting
Brush
_
(Some
Models)
Wand
_--
Combination
_
I/1
rush Some
Models)
TO OPERATE SUCTION CON-
TROL SLIDE
Telescoping Wand
When using attachments
for cleaning
draperies, small rugs with low pile and other
delicate items, twist the suction control slide
to the open position. This lever is located on
the telescoping
wand, close to the hose.
This will reduce suction for ease of cleaning.
Note: Return
suction control
slide to the closed
position for
normal cleaning.
Suction
Control
Slide
CAUTION
When using attachments, be careful not
to overextend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability
could cause the
cleaner to tip over.
