Idiomas disponibles
Idiomas disponibles
DIRT SENSOR
SOME
MODELS
The electronic
dirt sensor is a feature which
will detect particles
as they pass through the
vacuum cleaner.
The dirt sensor indicators and sensor
sensitivity switch are located on the front of
the switch cover.
A red light indicates
dirt is being picked up
by the cleaner.
A green light indicates
most
of the dirt has been picked up by the
cleaner.
OPERATION
As you vacuum, the red indicator light will
come on and stay on as long as the sensor
detects a high concentration
of particles
passing through the cleaner.
The green light indicates that most of the
cleaning is complete.
The sensor switch allows you to select the
sensitivity of the dirt sensor. The switch can
be set to HI (+) or LO (-) sensitivity.
Set the sensor switch to the HI (+) position
when:
• Cleaning bare floors.
• Cleaning carpet with low pile height.
Set the sensor switch to the LO (-) position
when:
• Cleaning heavily soiled areas.
• Cleaning carpet with deep pile.
• Cleaning new carpets.
Even with the sensor switch in the LO (-)
position, the dirt sensor will detect carpet
fuzz, especially
on new carpet, which may
cause the red light to remain on longer than
expected.
JjP "
- Sensor
Sensitivity
Switch
/
I
Switch
Cover
l
WARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electricalshock
or personal injuryfrom cleaner sud-
denly starting.
TO CLEAN DIRT SENSOR OPTICS
m
The dirt sensor optics consist of two optic
cells located inside the bag holder.
U
Occasionally,
it may become necessary to
clean the two optic cells to assure
maximum
performance.
It is
recommended
the optic cells be cleaned:
• When the red light stays on
continuously.
• When the green light stays on
continuously.
• When dirt or dust adheres to the
optic cells.
• Whenever the dust bag is changed.
To clean the sensor, wipe the optic cells with
a soft, dry cloth.
Never use cleaners or
liquids as they can help speed the recoating
of the optic cells and make it necessary
to
clean them much sooner than normal. The
dirt sensor area can be reached by
removing the dust cover and the dust bag.
Optic
Cells -.<
I
- Bag Holder
13
