Idiomas disponibles
Idiomas disponibles
Installation Instructions
INSTALLATION—VENTED TO THE OUTSIDE
INSTALL FILTERS
IMPORTANT: Check to be sure that the main ON/OFF
switch next to the motor is in the ON position.
/
—
00000
—
\
Push-button
switch
(horizontal
view from
inside
opening)
* Remove protective films on the grease filters and
filter cover panel.
NOTE: The charcoal filter is not required for this
installation.
i
L
[
=
Ooo006
a
\
* Tip the filter into the left or right side of
the opening. Lift the filter to the opposite
side and into the filter lock.
* To remove the filter, push the latch toward
the center and pull downward.
/[
Ooo O60
—
\
* To close the filter cover panel, push up on both
sides at the front corners to engage the latch.
13
[9] FINALIZE INSTALLATION
¢ Check to be sure all tape and packaging materials
have been removed.
* Refer to the Owner's Manual for operating
instructions.
