Specifiche - FTE Maximal MAX COMBO NET Manual De Usuario

SPECIFICATIONS
.Conditional Access Module Interface
Item
SMART CARD
. Tuner & Channel (DVB-S2)
Item
Type
Frequency Rage
RF Impedance
Signal Level
LNB Power
22KHz Tone
DiSEqC Control
Demodulation
Input Symbol Rate
FEC Decoder
. Tuner & Channel(DVB-T)
Item
Type
Frequency Rage
Signal Level
COFDM Spectrum
FEC Mode
. System & Memory
Item
Main Processor
Flash Memory
DDR Memory
Channel Capacity
Front
176
MAX_COMBO_NET_manual_print REV2.0.pdf 180 MAX_COMBO_NET_manual_print REV2.0.pdf 180
Specification
2 SLOTS, ISO 7816, GSM11.11 and EMV (payment systems) compatibility
Specification
1 F Type, IEC169-24, Female
950MHz to 2150MHz
75 Ohm unbanlanced
-65 to -25 dBm
13.5/18.5Vdc +/- 5%, 0.5Amax, Overload Protected
Frequency : 22KHz +/- 2KHz, 0.6Vpp +/- 0.2V
Version1.0, 1.2, Tone burst A/B
QPSK, 8PSK
DVB-S QPSK : 2~45 Msps
DVB-S2 8PSK/QPSK : 10~30Msps
1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode.
1/2, 2/3, 3/4, 5/6 and 7/8 in DVB-S mode.
Specification
IEC60169-2(VHF/UHF) female, 75 ohm nominal
VHF : 170MHz to 230MHz
UHF : 470MHz to 862MHz
-78.5dBm ~ -25dBm
(64QAM, Code Rate 2/3, Guard Interval 1/8,Gaussian Channel)
COFDM 2K/8K-Carrier
1/2, 2/3, 3/4, 5/6, 7/8
Specification
STi7110
8 Mbytes
128 Mbytes
Digital Channel : 10,000
1-Key(Power), 7-SEGMENT DISPLAY
31/01/2013 12:52:27 31/01/2013 12:52:27