FTE Maximal MAX COMBO NET Manual De Usuario página 11

GENERAL INFORMATION
IV. HOW TO SETTING RCU FOR TV
I. Manual Search
At first, Turn on the TV
1) Press Device LED Key ( STB or TV or VCR or DVD ) +
Then the Device LED Lamp will be on
2) Find the 3-Digit code of Device in brand list and input 3-Digit code accordingly one by one. - The Device LED
will be twinked ontime one by one also. When you finish inputting 3-Digit, the Device (TV or VCR or DVD) will be
turned off one time.
3) Then click OK to finish setting. (The Device LED will be turned off after twinkling 2 times.)
*NOTE : If you are not able to find the TV code which you are watching currently, please perform the below "Auto
Search". Then RCU will find the proper code automatically and it will work properly.
II. Auto Search (Using Up or Down key)
Device LED Key ( STB or TV or VCR or DVD ) +
1) Press
Then the Device LED Lamp will be on
Up or Down Key of RCU to find out equivalent device. At the moment of RCU matching to the equiva-
2) Press
lent device, the device will be turned off.
3) Then click OK to finish setting. (The Device LED will be turned off after twinkling 2 times.)
III. Factory Reset
1) Press TV LED +
2) Device LED will be turn off/on "TV
MAX_COMBO_NET_manual_print REV2.0.pdf 11 MAX_COMBO_NET_manual_print REV2.0.pdf 11
Setting Mode.
Setting Mode.
REC button at the same time during more than 5 seconds.
DVD VCR
"OK" key at the same time during 2 or 3 seconds.
"OK" key at the same time during 2 or 3 seconds.
STB" 3 times one by one and RCU will go to default mode.
7
31/01/2013 12:51:38 31/01/2013 12:51:38