Idiomas disponibles
Idiomas disponibles
4.
Press <DOWN> to select a slave mode and press <ENTER> to confirm.
7.4
DMX Mode
This mode allows you to control the device by any universal DMX controller.
All DMX-controlled devices need a digital start address so that the correct device responds to the
signals. This digital start address is the channel number from which the device starts to listen to the
DMX controller. The same starting address can be used for a whole group of devices or an individual
address can be set for every device.
When all devices have the same address, all the units will listen to the control signal on one
particular channel. In other words: changing the settings of one channel will affect all devices
simultaneously. If you set individual addresses, each device will listen to a separate channel number.
Changing the settings of one channel will only affect the device in question.
Example
To use the 1-channel mode, set the start address of the first unit to 1 (CH1), the second to 2 (CH2),
the third to 3 (CH3), and so on. The highest start address is 512.
Use the table below to define the correct address. The table shows the settings for units 1 to 3. Apply
the same principle for the other units.
Channel mode
14
Start address
Channel
16
Start address
Channel
22
Start address
Channel
To set the device to work with a DMX controller:
1.
Press <ENTER> until Program highlights and press <ENTER>.
2.
Press <DOWN> until Play highlights and press <ENTER>.
3.
Press <DOWN> until DMX Receive highlights and press <ENTER> to confirm.
4.
Use <UP> and <DOWN> to set the DMX starting address (A001-A512) and press <ENTER>.
DMX Channel Values
Channel mode
Name
14
16
22
1
1
1
pan
2
2
pan fine
2
3
3
tilt
4
4
tilt fine
3
5
5
movement speed
6
movement function
4
6
7
shutter function
V. 01 – 30/04/2013
Start addresses
First unit
Second unit
1
15 (1 + 14)
1 ~ 14
15 ~ 28
1
17 (1 + 16)
1 ~ 16
17 ~ 32
1
23 (1 + 22)
1 ~ 22
23 ~ 44
Function
pan coarse
pan fine
tilt coarse
tilt fine
fastest to slowest
normal
movement with blackout
[no function]
normal shutter functions
pulse-effect forward
LX200B
Third unit
29 (15 + 14)
29 ~ 42
33 (17 + 16)
33 ~ 48
45 (23 + 22)
45 ~ 66
8
Highest start address
499
497
491
min
max
DMX
DMX
0
255
0
255
0
255
0
255
0
255
0
15
16
31
32
255
0
15
16
31
©Velleman nv
