Use and Caution
1. Before use:
Plug the refrigerator in a 110-120V~ exclusive socket.
After the refrigerator is running, put your hand on the air outlet to verify
if it is cold enough. Then you may put food inside the refrigerator.
2 Digital Temperature controller
The digital temperature controller is an integrated intelligent
controller that controls the one HP compressor.
Its main functions are: Temperature Display/ Temperature Control/
Manual, automatic defrost / Illumination Control/ Value Storing/
Parameter Locking
Front Panel Operation
1 To set temperature:
Press the "Set" button, the set temperature is displayed.
Press the
Press the "Set" button to exit the adjustment mode and display the
cold-room temperature.
2 If no other button is pressed within 10 seconds, the cold-room
temperature will be displayed.
3 Illumination: Press the
Manual start/stop defrosting: Press the
6 seconds to start defrosting or stop defrosting.
4 The indicator light twinkles when the compressor stops working and the
indicator light is on when the compressor is working.
5 Defrost LED: during defrosting, the LED is on; When it stops defrosting,
the LED is off, During the delay display of defrosting, the LED flashes.
6 Digital controller reset:
When the display shows "Disorder", press the "
until the buzzer rings, quickly press the "
the buzzer rings again, the display will flash for 3 seconds, and the
factory setting will be restored.
or
button to modify and store the displayed value.
button, it lights; Press it again, and it stops.
button and hold it for
" button for 6 seconds until
6
" button for 2 seconds