Idiomas disponibles
Idiomas disponibles
Anti-splintering device
CAUTION:
The anti-splintering device cannot
be used when making bevel cuts.
For splinter-free cuts, the anti-splintering device can
be used. To install the anti-splintering device, move the
tool base all the way forward and fit it from the bottom
of tool base.
When you use the cover plate, install the anti-splintering
device onto the cover plate.
Fig.12
► 1 . Base 2. Anti-splintering device
Dust extraction
Optional accessory
The dust nozzle is recommended to perform clean
cutting operations.
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
4
Fig.13
► 1 . Dust nozzle 2. Base 3. Hook 4. Hole
1
2
3
1
2
To secure the dust nozzle, tighten the clamp screw at
the front of the dust nozzle. The dust nozzle can be
installed on either left or right side of the base.
Fig.14
► 1 . Clamp screw
Then connect a Makita vacuum cleaner to the dust
nozzle.
1
Fig.15
► 1 . Dust nozzle 2. Hose for vacuum cleaner
10 ENGLISH
1
2
