Installation
Warning!
The Sit-stand Workstation and CPU Wall Mount are designed
to be installed on a wood stud, solid concrete, or cinder block
wall. The wall structure should be capable of supporting at
least four times the weight of the mounted equipment.
The included mounting hardware may not be adequate for
installation on different wall types not indicated here. Always
consult a construction professional before installing the Wall
Mount Bracket. Failure to do so may result in personal injury
or equipment damage.
For stud wall installations, it is important to drill the
mounting holes in the middle of the stud. If the stud is too
narrow or the mounting holes are too close to the edge, the
stud may split and be unable to support the weight.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
12
