Idiomas disponibles
Idiomas disponibles
Prepare food
•
You can interrupt the preparation process at any time by pressing the
Start / Pause button 24 or opening the flap 13.
•
By pressing and holding the on/off switch 23 you can stop the
preparation process and switch off the product.
1. Connect the power plug to the mains.
The on/off switch 23 lights up.
2. Press the on/off switch 23 .
On the control panel 1 , all the elements light up.
A beep sounds each time the button is pressed.
3. Open the flap 13 .
4. Place the drip tray 8 in the bottom of the interior.
5. Insert the respective accessories with the ingredients to be prepared.
6. Close the flap 13 .
7. Press the Menu button 22 .
The first programme in the menu selection 20 flashes and the temperature display 16
and time display 18 show the programme's default settings.
8. Select the desired programme in the menu selection 20 by pressing the menu
button 22 several times.
The selected programme flashes on the control panel and the temperature display 16
and time display 18 shows the programme's default settings.
You can adjust the temperature and time if necessary. Determine the required
preparation time for the respective ingredient (see chapter "Manual temperature
and time setting").
9. Press the Start / Pause button 24.
The preparation process starts. The menu selection 20 goes out and only the active
programme lights up. The time display shows the remaining preparation time.
When the time has elapsed, the preparation process ends and a signal tone sounds.
10. Remove the respective accessories with the prepared ingredients.
11. Disconnect the product from the mains when all operating noises (hot air blower
running) have stopped.
Manual temperature and time setting
You can set the preparation time and temperature manually. You can also do this
during the preparation process.
94
