Idiomas disponibles
Idiomas disponibles
9. Short press to increase volume. While playing music, long press to play the following song. In FM mode,
long press to select the next radio station.
10. AUX audio input
11. Insert a USB device to play MP3 music
12. Insert a microSD card to play MP3 music
13. Plug in a wired microphone and sing a song
14. Charging indicator: The red light is on when charging. When fully charged, the green light is on
15. DC 5V: Use the supplied USB-C cable and connect it to a charger
BLUETOOTH CONNECTION
Turn the speaker on and select Bluetooth mode. Activate the search for Bluetooth devices on your smartphone.
Select CORSICA in the list of found devices. If requested, enter the password 0000.
RECORDING VIA BLUETOOTH
The advantage of this function is that you will not only record your voice from the microphone on the USB/mi-
croSD device but also the accompaniment music which is not the case of the usual REC function.
1. Insert a microSD or USB device and switch into Bluetooth mode.
2. The mobile phone will play the accompaniment music after the Bluetooth connection
3. Connect a wired microphone or turn on a wireless microphone
4. Long press the record button on the remote control to start recording your voice and the accompaniment
music on your USB/microSD device. Short press the record button to stop the internal recording and start
playing the recorded file.
TWS CONNECTION
Switch on both speakers simultaneously in Bluetooth mode. Keep the MODE button pressed on any one of the
speakers and the speakers will pair. To disconnect the speakers, keep again the MODE button pressed for some
time.
When the speakers are connected in TWS, activate the Bluetooth function of your mobile phone and select
CORSICA in the list of found devices. Once pairing has been successful, the music on your smartphone will be
played by both boxes synchronously.
When both boxes are connected via TWS, the action on one box applies also to the other one. Keep the ON/OFF
button pressed on one box and both boxes will be switched off.
The optimal distance between two boxes connected by TWS is 5 meters.
USE OF THE REMOTE CONTROL
Please operate the remote control within a distance of 6m and 30° between the remote and the appliance. Aim
the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
If the remote control doesn't work properly, please check the batteries.
REMOTE CONTROL
1. Record button: Press to start and stop the record
2. Sound effect button: Press to stop the music and insert a sound effect
3. Indoor/outdoor sound: Press to select a sound mode depending if you use the speaker indoors or outdoors.
It is the same function as the BASS BOOST button on the top panel
4. Previous song: Press to play the previous song
5. Press to decrease the volume
6. Press to decrease the volume of the microphone
7. Press to activate the mic priority function. The volume of the music will decrease while you are talking into
the microphone
8. Press to select a light effect. Long press to turn the light off
9. Repeat function: Press to repeat all songs
10. MODE button: In Bluetooth mode, long press to link two boxes via TWS.
Short press to cycle through the input sources. If no USB, TF or AUX device is connected, only Bluetooth or
FM can be selected
11. Press to increase the volume
12. Next song
13. Press to increase the volume of the microphone
14. Original sound: Press to lower the human voice on the sound track
15. Direct selection of a file
4
MANUAL - CORSICA
©Copyright LOTRONIC 2023
