Erreka NAOS NASR70E Manual Del Instalador página 61

Step 6 (menu 6): Fixed Code transmitters or Roller Code transmitters
Personalisation for Roller Code transmitters with personalised code

To use Roller
personalised code, select the option r and
activate the seed (electric bridge or button, as
appropriate) of a personalised transmitter while
digit r is flashing. The display will show rÿ .
M278P6
Code transmitters with
STARTING UP AND PROGRAMMING
1 With the display showing 6, press SET once: digit F
will start flashing on the display (this is the preset
value for this parameter).
2 Pressing the |+ and |- buttons, select the type of
transmitters to use:
F: Fixed Code transmitters
r: Roller Code transmitters
3 Once the required value is selected, press SET to
confirm and save it.
4 Press the |+ button once to access the next
programming step.

In steps 4 to 12 (menu 4 to 12), programming can
be finished in advance by holding down SET (until
CL is displayed), without having to continue
advancing using the |+ button.
• The receiver memory must be empty in order to
subsequently change from r to F or from rÿ to r,
to which end all codes must be deleted as shown
in "Radio code programming (CODE button)" on
page 61.
NAOS garage door opener operator
M278P6r
57