D
EN
• Failure to operate in a safe and responsible manner could result in damage to the
product or other property, or even serious injury to yourself or others. Carefully read
this entire document and all safety and compliance guidelines provided before use.
Warnings
TM
1. DJI FLYCART
30 Winch System is only compatible with DJI FlyCart 30 aircraft, DO NOT use it with
other devices or for other usages except for delivering cargo.
2. The winch system requires use of an extension cable, otherwise it will affect deliver safety. Follow
the instructions of DJI FlyCart 30 Winch System User Guide to operate the winch system.
3. The max payload of the winch system is related to the takeoff weight of the aircraft, DO NOT
overload.
4. When connecting the cables, make sure the connection is firm and secure. Operate with caution
to avoid damaging the cables.
5. Check if the hook can be used normally, and the cable can be released and reeled up normally
before usage.
6. Operate with caution to avoid injury caused by sharp or moving mechanical parts.
7. When using the winch system, make sure to stay away from the aircraft to avoid injury.
8. DO NOT attempt to disassemble any part of the winch system that has already been mounted
prior to shipping, unless this user guide states that part may be detached. Otherwise, the
performance will be affected.
Introduction
DJI FlyCart 30 Winch System enables aerial cargo loading and unloading in harsh environments
where the aircraft cannot land. After installing the corresponding landing gear, the aircraft is easier
to store and transport.
Installation
Watch the tutorial video of the installation at https://www.dji.com/flycart-30/video before
installing the winch system. Make sure to follow the steps and install the winch system correctly.
1. Remove the cargo box of FlyCart 30. Detach the strap of the cargo box firstly. Then remove the
cargo box. (Figure A)
2. Remove the landing gear and rear radar. (Figure B)
4
2
空吊系统
PAYLOAD
1
