Idiomas disponibles
Idiomas disponibles
Column a)
Column b)
c) Energy input
Box 14
Box 22
IP..
Box 23
3
Commissioning
3.1
Transportation
The MIG/MAG welding machines are equipped with rigid and swivel casters to facilitate transportation on level ground.
Moving the machines on sloping ground requires additional measures to keep them safety manoeuvrable.
Do not use the handles for crane hoisting.
Prior to all movement of the machine the gas cylinder should be secured safely to keep it from falling off the machine.
In field use, when placed in the intended cylinder rack and secured by the chain provided, a gas cylinder of maximum
20 litres capacity only may be transported with the welding machine.
3.2
Electrode Wire Spool Installation
Place wire spool onto spool carrier so that wire runs off clockwise. The spool carrier is equipped with a brake, which
can be adjusted by means of a hex. socket head cap screw. Set brake so that spool does not idle after the wire feed
stops, to prevent the wire from coming loose and falling off the spool.
need not be used if the duty cycle (duty factor) for the rated maximum welding
current is 60 % or 100 %.
need not be used if the duty cycle (duty factor) at the rated maximum welding current is 100 %.
Energy input symbol e.g.:
Degree of protection, e.g. IP21 or IP23.
Symbol for protection class II, if applicable.
Input supply, number of phases (e.g. l or 3), symbol for
alternating current
and the rated frequency (e.g. 50 Hz or 60 Hz)
Engine
Motor
Belt drive
