Palram Aquila 2050 Manual De Instrucciones página 4

Ocultar thumbs Ver también para Aquila 2050:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
C!D
Door Cover
Attention!
Please read
these
instructions carefully before you start to assemble this product.
Please
carry
out the
steps
in
the order
set
out
in
these instructions.
Keep
these
instructions
in
a
safe
place for
future
reference.
Safety Advice
Sort the parts and check against the
content
list.
For
safety purposes we
strongly recommend the product
be
assembled by
two
people.
We
strongly recommend the
use
of work
gloves during assembly.
Do
not
attempt
to assemble the Door Cover
in
windy
or wet conditions.
Always wear
shoes
and safety goggles.
Dispose
of
all
plastic
bags safely
-
keep
them out of
reach
of
small
children.
Keep
children away from the assembly
area.
Do
not
attempt
to assemble the Door Cover if you
are
tired,
have
taken drugs,
medication
or alcohol, or if you
are
prone to dizzy
spells.
When using
a
stepladder or power tools, make
sure
that you follow the manufacturers
safety advice.
Be
sure
to check that there
are no
hidden
pipes or cables
in
the wall before drilling.
Please
consult your
local
authorities if any permits
are
required to install
a
Door
Cover.
Before assembly,
consider the door's opening (inside or outside).
Please
apply silicone sealant to the
rear
edge
in
order to prevent water
seepage.
Tighten
all screws
when completing assembly.
Keep
roof
and
gutter
clear
of
snow,
dirt
& leaves.
Heavy snow load on
roof
can
damage the product making it unsafe to stand below or
nearby.
Cleaning
instructions
Clean
the product once assembly
is
complete.
When
your Door
Cover needs
cleaning,
use
a
mild detergent solution and
rinse
with
cold
clean water.
Do
not
use
acetone, abrasive cleaners or
other
special
detergent to
clean
the
panel.
Additional information
The
wall anchoring kit supplied
with
this product
is
suitable only for concrete walls.
Other wall types need
an
accordant wall fixation
kit.
Please
apply silicone sealant if needed
You are
solely responsible for
determining whether the handling,
storage, assembly,
installation or
use
of this product
is
safe
and
appropriate
in
any
location or for
any given
application.
The
manufacturer
is
not responsible for
any damages
or injury to you, any other
person
or
any
property resulting from the improper handling,
storage,
installation, assembly
or
use
of this product, or the failure to follow the manufacturer's written instructions
regarding the handling,
storage,
installation, assembly and
use
of this product.
This
product
is
intended for normal residential
use
only.
Do
not
use
this product for any application that
is
not recommended
in
these
instructions or building
codes
in
effect
in
location where this
product will
be used.
Always take care and
use
appropriate
safety
equipment (including
eye
protection) when assembling or installing this product.
Please
note:
it
is
possible to extend the canopy,
however once fully assembled
it
is
impossible to add the extension.
loading