Eldom ess RW35 Instrucciones De Uso página 11

Plancha de pelo
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
EN 
OPERATING INSTRUCTION
EN
INSTRUKCJA OBSŁUGI
HAIR STRAIGHTENER RW35
SUSZARKA DO WŁOSÓW
GENERAL DESCRIPTION
1. Heating plates
2. Pliers
3. Locking device
4. Indicator light
5. On/Off switch + temperature control
6.
Power cord
INTENDED USE
The RW35 hair straightener is used to straighten hair. The ceramic coating covering the plates (1) distributes
the heat evenly over the entire surface, thus protecting the hair from excessive heat.
OPERATION
Preparing the appliance
• Before connecting the appliance to the power supply, ensure that the switch (5) is set to the in the "OFF"
position.
• Once the appliance is connected to a power supply conforming to the parameters specified in the
instructions, start the appliance
• by turning the switch (5) to the right and set the desired temperature.
• The indicator light (4) will start flashing and will be on continuously when the set temperature is reached.
• To reduce the temperature, turn the switch (5) to the left and adjust the temperature.
• To switch the appliance off, turn the switch (5) to the left to the "OFF" position.
Straightening
• Hair must be washed and combed thoroughly before straightening. The hair must be slightly damp or dry.
• Place hair in strands a few centimetres wide between the plates (1) and squeeze firmly. Move the device
slowly from the root of the hair towards the ends.
• Do not hold hair in the appliance for more than 20 seconds at a time.
• Only brush the hair after it has cooled down.
• The operating temperature set by the user tends to change (lower) in contact with damp hair. The appliance
continuously adjusts the temperature.
AUTOMATIC SWITCH-OFF
• For safety, the appliance has an automatic switch-off function.
• If the appliance is not used continuously for more than 60 minutes, it will automatically switch off.
• To continue using the appliance after this time, turn the switch (5) to the "OFF" position and then set the
appropriate temperature.
rw35
TECHNICAL DATA
Power: 35W
Mains supply:
110-240V~ 50-60Hz
11
loading