Idiomas disponibles
Idiomas disponibles
20
2.- Both ways: using the ring on the side of the unloaded end
of the rope will add friction when holding the unloaded end
of the rope. In this way, you can reduce the speed manually.
ANCHOR DEVIDE
Attachment to the anchor device
Incorrect attachment to an anchorage device can cause falls
resulting in serious injury or death.
- Inspect the anchorage at least once a year.
-Only use anchorages that correspond to the requirements of
the PPE.
Anchorage devices are required in places where there is a
risk of falling. The building planner/owner is responsible
for the placement and installation of anchorage devices in
accordance with the applicable legal requirements.
Buildings and in-plant structures must have an adequate
load-bearing capacity. In accordance with the applicable
standards
TRAINING
The customer and the user must ensure that they
have understood the functioning of this product and all
safety notes and know how to use it safely. You must
complete training on the correct use, installation, inspection,
maintenance and limitations of use before using this
product. You must repeat the training regularly without
endangering trainees or users.
The training inspection requirements for this product must
be followed (see inspection and maintenance). Training is
an important part of Irudek products and services. No
equipment will prevent injury or death if you do not know how
to use it correctly.
To ensure your safety, we offer training courses where you can
learn how to use this product safely. For more information,
please contact us on +34 943 69 26 17
ACCESORIES
This product may only be used in combination with tested
and certified products.
Use this product only with tested products or with products
that have been recommended by Irudek.
TESTED AND CERTIFIED PRODUCTS
• Rescue triangle: EN 1497:2008
• Energy absorber: EN 355:2002
• Carabiner: EN 362:2005
• Anchoring device: EN 795:2012
• Full body harness: EN 361:2002
• Safety ropes: EN 354:2011
• Work positioning: EN 813:2018
The products listed above are available at www.irudek.com.
If you need further information, please email or call us.
IRUCASE -IRUBAG ACCESSORY
The BOREAS Hub device can be kept packed either in the
IruCase or vacuum packed in the IruBag. Both packages allow
the equipment to be preserved in a controlled atmosphere,
ensuring that, as long as the atmosphere is maintained, its
characteristics will last for a period of 10 years. The Irudek
Irucase and IruBag must be inspected at least once a year,
as marked in the inspection instructions and in any case
before each use (damage, moisture, etc.) If the box or bag is
damaged, it must be sent to Irudek for inspection.
After a maximum of 10 years, the textile parts of the Boreas
hub must be replaced and the metal parts must be inspected
by Irudek.
In case of combining both containers and keeping the IruBag
inside an IruCase, the inspection and rope replacement
period could be extended up to 20 years.
SERVICE LIFE AND PERIOD OF USE
Conditions of use and other factors may influence its service
life. Therefore, this product may need to be repaired or
removed prematurely (see below). The lower the descent
height, the more times the rope will pass through the
descender until the device needs to be inspected. Therefore,
