Idiomas disponibles
Idiomas disponibles
INSTRUKCJA OBSŁUGI
OPERATING INSTRUCTION
EN
PLANETARY MIXER IK2901
PLANETARY MIXER IK2901
GENERAL DESCRIPTION
1.
Base
2.
Variable speed switch
3.
Lock button
4.
Base arm
5.
Bowl
6.
Head
7.
Mixing attachment
8.
Kneading attachment
9.
Whisking attachment
10. Cover
INTENDED USE OF PLANETARY MIXER IDEAL IK2901
Different speeds, attachments for kneading and mixing dough, and for whisking make this planetary
mixer an indispensable aid in many time-consuming and cumbersome kitchen tasks.
The processor is efficient, durable, easy to use and to keep clean, as well as safe, provided that
the SAFETY TIPS are observed.
INSTALLATION
Before using the unit, make sure that the unit, plug and power cord are in working order and that
all parts of the packaging have been removed.
•
place the unit on a flat, firm and stable surface,
•
make sure the unit is unplugged and the on/off switch (2) is in the "0" position,
•
press the locking button (3) and tilt the base arm (4) until it locks in place,
•
install the cover (10) onto the base arm (4) from below (fig. 2),
•
place the bowl (5) on the base (1) in its designated place and lock it by turning to the right,
•
install one of the attachments (7, 8, 9) on the head (6) - to do this, slide the attachment onto
the head and lock it by turning to the left (fig. 2),
•
press the button (3) and lower the base arm (4).
HOW TO USE
•
before commissioning, ensure that all components are correctly assembled,
•
connect the appliance to a power supply conforming to the parameters given above,
•
the robot starts working when the speed is selected with the switch (2), by changing its position
you can obtain 6 different speeds,
•
the appliance is equipped with a "slow start" function, which means that it reaches
the appropriate speed after a few seconds,
•
products can be added either before the bowl is mounted on the base or while the appliance
is running, through the dedicated opening in the lid (10).
NOTE
Choose the correct speed depending on the attachment used - pic. 1.
The speed should also be matched to the consistency of the products being processed.
•
when you have finished working, turn the switch (2) to position "0" and wait for the attached
attachment to stop,
•
then swivel the base arm (4) by pressing the locking button (3),
NOTE
Be careful when opening the base arm (4).
It is advisable to hold it from above so that it does not open too abruptly.
•
remove the cap by turning it to the right,
•
unlock the bowl (5) by turning it to the left and remove it from the base (1).
12
TECHNICAL DATA
−
power: 800 W
−
maximum power (MBP): 2200 W
−
supply voltage: 220-240 V~ 50-60 Hz
−
max. time of continuous operation:
7 minutes
−
time before recommencing operation:
25 minutes
−
bowl capacity: 4 litres
The speed range depends on the type of socket
used - fig.1.
