Idiomas disponibles
Idiomas disponibles
ASSEMBLY
Put the tank on the floor.
Connect the 2 support legs to the tank cabinet using 4 M12 screws and flat washers.
Attach the cross bar to the support legs using 2 M10 screws and flat washers.
Attach the adjustable feet to the bottom of the support legs.
Turn over the machine and adjust the height of adjustable feet.
OPERATION
Solvent adding
Open cabinet cover.
Add solvent through the web tray.
Note: Put 8 to 14 liters.
Compressed air connection
Connect the air compressor φ8 hose to the quick fitting at the bottom of the cabinet.
Adjust appropriate air pressure based on the parts type you are washing.
Light and fan
Plug the parts washer machine to the electric power supply.
Press the Power Supply switch to turn on the light and activate the fan.
Solvent temperature setting
Press the OK button in the digital temperature controller.
Then, press the SET button.
Press the up/down buttons to adjust the temperature.
Heating activation
To heat the solvent, press the heating switch.
Cleaning
Put parts into the machine and close the cabinet.
